Whether you're decorating your bedroom, setting up your home office, or opening a retail store, learning how to hang a neon sign properly is essential. LED neon signs are lightweight and versatile, but installing them correctly ensures they stay secure, look their best, and remain damage-free over time.
This step-by-step guide covers everything you need to know — from tools and surfaces to safety tips and installation options.
🛠 Tools You’ll Need
Before getting started, gather the right tools and accessories. Most custom LED neon signs (like those from Neonit) come with pre-drilled holes and basic mounting hardware.
Common tools and supplies include:
-
Power drill or screwdriver
-
Wall anchors and screws
-
Level and pencil for marking
-
Hanging chains or hooks (optional)
-
Command strips or adhesive (for temporary installs)
🧱 Surface Preparation & Location Tips
Choose a flat, stable wall surface that’s near a power outlet. Make sure the area is dry and free from dust or debris. Check the weight and size of your sign to determine if your wall can support it — especially on drywall or plaster.
📝 Pro Tip: If your sign is large or being installed in a high-traffic area, opt for wall screws or chains over adhesive-only solutions.
🔧 Step-by-Step Hanging Instructions
1. Mark Your Placement
Hold the sign up to the desired spot and mark where the mounting holes are using a pencil. Use a level to make sure it’s straight.
2. Drill Pilot Holes
If mounting to drywall, use anchors. For brick or concrete, use a masonry bit and heavy-duty wall plugs. If hanging, install ceiling hooks or wall-mounted chains.
3. Secure the Sign
Align the acrylic backboard holes with the drilled spots. Use screws and washers (included with many signs) to fasten the sign without cracking the board. If hanging, connect chains securely to ceiling hooks or brackets.
4. Plug It In
Connect the LED neon sign to the power adapter and plug it into a nearby outlet. Use cable clips or guides to keep the wire cleanly routed along the wall.
🏠 Surface-Specific Tips
-
Drywall: Use plastic wall anchors to prevent sagging.
-
Brick or Concrete: Use masonry anchors and screws.
-
Glass or Tile: Avoid drilling; opt for suction hooks or heavy-duty adhesive strips.
-
Wood: Screws can usually be installed directly.
🌦 Indoor vs. Outdoor Considerations
If you're hanging your sign outdoors:
-
Make sure it's rated for outdoor use (Neonit offers waterproof options).
-
Use weather-resistant screws and anchors.
-
Avoid direct exposure to water if the sign isn’t fully sealed.
For indoor use, avoid placing signs above heat sources or in high-humidity areas like bathrooms unless the sign is specifically rated for such environments.
⚠️ Safety & Maintenance Tips
-
Never overtighten screws — acrylic can crack under pressure.
-
Keep cords secured and avoid overstretching the power adapter.
-
Use a microfiber cloth to gently clean dust from the sign and backing.
✅ Final Thoughts
Hanging a neon sign is a simple process that only takes 15–30 minutes with the right tools and planning. Whether you're creating a cozy vibe at home or installing brand signage in your store, a clean, safe setup will keep your sign looking sharp and glowing bright.
Ready to make your wall shine? Just follow these steps and you'll have your custom LED neon sign installed in no time — safely, securely, and beautifully.
